Product
SANITARY HYGIENIC PLUG VALVE with Tri Clamp Ferrule / Weld / 3A / IDF / RJT / BSM / CIP FLAT FACE / DIN 11851 / SMS 1145 threaded male connections, Inox/Stainless Steel - Manual ... 食品/飲料/啤酒/釀造/製酒/牛乳/生技/製藥/化妝品/化工/純水系統/個人照護/車輛/電子/半導體/食品飲料包裝機械/整廠規劃/整廠設備/廠務系統/衛生級配管工程用閥件 食品衛生級 考克閥 栓塞閥 手動, Tri Clamp Ferrule / Weld / 3A / IDF / RJT / BSM / CIP FLAT FACE / DIN 11851 / SMS 1145 外牙接口
Inox/Stainless Steel Sanitary HYGIENIC PLUG VALVE with Tri clamp Ferrule/Weld/3A/IDF/RJT/BSM/DIN/SMS connections/ends - manufactured by TECH CONTROL ENTERPRISE CO., LTD. TAIWAN
Product ID: 10
PLUG VALVES offer the advantage of minimal pressure loss.
The specialized tapered core design eliminates internal grooves where contamination could occur, reducing wedging and wear while ensuring easy cleaning.
Manufactured by TECH CONTROL ENTERPRISE CO., LTD., our stainless steel Food-Grade Sanitary Plug Valves are widely utilized in the Beverage, Chemical, and Dairy Processing industries. They are ideal for low-pressure applications ( recommended below 50 PSI ).
The characteristics of plug valves are as follows:
🟦 Low Pressure Drop :
Plug valves provide exceptionally low pressure loss.
🟦 Hygienic Design :
The tapered core design eliminates dead spaces/grooves to prevent contamination, minimize friction/wear, and simplify the cleaning process.
In processes such as
FOOD, BEVERAGE, BEER, BREWERY, WINEMAKING, DAIRY, PHARMACEUTICALS, BIOTECHNOLOGY, COSMETICS, CHEMICALS, PURE WATER SYSTEM, PERSONAL CARE, ELECTRONICS, and SEMICONDUCTORS, sanitary valves should meet the following requirements to ensure hygiene and safety during production:
📌 Material Selection must comply with relevant industry regulations and standards. Common materials include food-grade stainless steel, special alloys, or high-quality polymers, all of which offer excellent corrosion resistance and high-temperature performance.
📌 Surface Finishing should be properly treated to provide a highly smooth, seamless, and easy-to-clean surface, minimizing the risk of microbial growth.
📌 Valve Design should be simple, with no dead zones or crevices, to prevent the accumulation of bacteria or contaminants and to facilitate cleaning and sterilization.
📌 Sealing Performance should be excellent to prevent leakage or cross-contamination.
📌 Ease of Disassembly and Assembly :
Sanitary valves should be designed for easy dismantling and reassembly to support effective cleaning and sterilization, ensuring hygienic conditions during production.
📌 Quick Connection and Disconnection :
Since valves may need to be frequently replaced or cleaned, they should allow fast connection to and removal from pipelines, saving maintenance time and improving production efficiency.
📌 Compliance with Sanitary Standards :
The design and manufacturing of sanitary valves should meet all relevant hygiene standards.
👉 All Stainless Steel Sanitary/Hygienic-Grade Tube, Fittings, Valves & Pumps produced by TECH CONTROL ENTERPRISE CO., LTD. undergo strict quality control using the Olympus Innov-X Delta XRF Metal Analyzer.
👉 With a surface finish of Ra ≤ 0.8μm, our products comply with food-grade sanitary standards.
👉 They are precision-machined for easy welding, assembly, and maintenance. Sharp edges are polished to ensure safety during assembly, maintenance, and cleaning.
👉 Each item undergoes 100% inspection before shipment.
👉 TECH CONTROL ENTERPRISE offers a complete line of Stainless Steel Hygienic TUBE FITTINGS, VALVES & PUMPS with various connections and standards, including 3-A Tri-Clamp, Butt Weld, Roll-On Expanding, BEVEL SEAT, IDF, RJT/BSM/CIP Flat Face, DIN 11851, and SMS 1145, printed product catalogs are available upon request.
(以下產品尺寸圖, 點擊後可放大) !!!
Click the DIMENSION DRAWINGS below to Enlarge !!!
|
PLV-2T-C-R
夾式 2通考克閥 橡膠軸
PLV-2T-C-S
夾式 2通考克閥 不銹鋼軸
2 Way Plug Valve
with
Clamps Ends
SS Plug or Rubber Plug
PLV-3T-C-R
夾式 3通考克閥 橡膠軸
PLV-3T-C-S
夾式 3通考克閥 不銹鋼軸
3 Way Plug Valve
with
Clamps Ends
SS Plug or Rubber Plug
PLV-2T-M-R
Bevel Seal 外牙接口
2通考克閥 橡膠軸
PLV-2T-M-S
Bevel Seal 外牙接口
2通考克閥 不銹鋼軸
2 Way Plug Valve
with
Bevel Seat Male Ends
SS Plug or Rubber Plug
PLV-3T-M-R
Bevel Seal 外牙接口
3通考克閥 橡膠軸
PLV-3T-M-S Bevel Seal 外牙接口
3通考克閥 不銹鋼軸
3 Way Plug Valve
with
Bevel Seat Male Ends
SS Plug or Rubber Plug
|
PLV-2T-W-R
焊式 2通考克閥 橡膠軸
PLV-2T-W-S
焊式 2通考克閥 不銹鋼軸
2 Way Plug Valve
with
Weld Ends
SS Plug or Rubber Plug
PLV-3T-W-R
焊式 3通考克閥 橡膠軸
PLV-3T-W-S
焊式 3通考克閥 不銹鋼軸
3 Way Plug Valve
with
Weld Ends
SS Plug or Rubber Plug
PLV-2T-W-R
短焊接口 2通考克閥
橡膠軸
PLV-2T-W-S
短焊接口 2通考克閥
不銹鋼軸
2 Way Plug Valve
with
Weld Ends SHORT
for welding on male ends
SS Plug or Rubber Plug
PLV-3T-W-R
短焊接口 3通考克閥
橡膠軸
PLV-3T-W-S
短焊接口 3通考克閥
不銹鋼軸
3 Way Plug Valve
with
Weld Ends SHORT
for welding on male ends
SS Plug or Rubber Plug
|
 |
 |
|
ASSEBBLY DIAGRAM
of
Plug Valve
考克閥 零件組合圖
|
|
 |
Due to several practical limitations related to valve design and long-term reliability. The reasons are as below :
1. Real Operating Conditions
Silicone can withstand short-term high temperatures, but long-term exposure to high temperatures (e.g., 130–150 °C in SIP/steam sterilization) can cause:
Softening or flow (creep) of the seal
Loss of elasticity, reducing sealing performance
Potential leakage over time
Short CIP cycles with hot water may be acceptable, but prolonged or repeated high-heat exposure stresses the material beyond its reliable performance window.
2. Valve Structure Limitations
Plug valves rely on a tight fit between the stainless steel body and the plug.
Silicone seals are compressed between metal surfaces to maintain a leak-free seal.
At high temperatures:
Silicone softens → plug may become harder to operate (increased torque)
Seal may deform unevenly → uneven or incomplete sealing
3. Thermal Expansion Mismatch
Stainless steel and silicone have different thermal expansion coefficients.
At high temperatures:
Silicone expands more than metal → seal extrusion, jamming, or uneven compression
Can accelerate wear or damage the plug surface
4. Long-Term Reliability
High-temperature exposure over time accelerates:
Hardening, cracking, or permanent deformation of the silicone
Loss of sealing integrity
Hygienic valves require zero leakage.
5. Practical Recommendations
For high-temperature applications or repeated steam sterilization:
Use Ball Valves or Diaphragm Valves specifically designed for high-temperature CIP/SIP.
✅ Summary:
Although silicone can tolerate high temperatures in theory, the plug valve design, thermal expansion differences, and long-term seal reliability make it suitable only for low-temperature applications. Using it at high temperatures risks leakage, increased operating torque, and shorter seal life.
Dairy Plug Valve
Specifications:
1" 1.5" 2" 2.5" 3"
DN25 DN40 DN50 DN65 DN80
Body : SS316
( Material Test Reports EN10204-3.1 are available upon request )
Plug (optional) : SS316 or Silicone
complies with the requirements of FDA 21 CFR 177.260
Surface Finish : meet the requirements of 3-A Sanitary Standards - This refers to the surfaces that come into contact with liquid raw materials, products, or cleaning solutions in food, beverage, biotech, and pharmaceutical processes.
Connections (optional) :
3-A Tri-Clamp Ferrule Ends
3-A Weld Ends
3-A Bevel Seat Male Ends
IDF Threaded Male Ends
RJT/BSM/CIP FLAT FACE Threaded Male Ends
DIN 11851 Threaded Male Ends
SMS 1145 Threaded Male Ends
Operating : Manual
Pressure Rating : Water pressure 10 kg/cm² (142 psi at 93°C / 200°F)
Quality Control (QC) Test Method : Tested with water at ambient temperature at 200 PSI for 10 seconds
Gasket Material Properties (Recommended Operating Temperatures) :
Silicone : -30°C~120°C, High Temperature Resistant; Black
Inquiry or Ordering Example :
Item Name / Connection Type / Material / Size / Quantity
PLV 2T-CS / 316 / 1.5" / 2 PCS
Features:
-
Versatile Connectivity : Available with Silicone Rubber Plug or Stainless Steel Plug. We offer a wide range of connection types, including 3-A Tri-Clamp Ferrule, 3-A Weld, and various threaded Male ends such as 3-A Bevel Seat, IDF, RJT / BSM / CIP FLAT FACE, DIN 11851, and SMS 1145.
-
Material Assurance : All materials are strictly verified by the Olympus Innov-X Delta XRF Metal Analyzer to ensure superior corrosion resistance.
-
Precision Machining : Accurately machined angles reduce gasket wear and deformation, significantly extending service life.
-
Safety & Finishing : All sharp edges are deburred and polished to ensure safety during assembly, maintenance, and cleaning.
-
Hygiene Standards : Fully compliant with Food-Grade Sanitary Standards.
-
100% Quality Inspection : Each unit undergoes 100% testing and inspection before shipment
Certificate:
- ISO-9001
Order Information:
- Minimum Order: Negotiable
- Buyer's Label Offered
- FOB: TAIWAN
Contact Detail
| CEO: | Mr. Chung, Chin-Ying |
| Contact: | Manager Ms. Vickey Chung or Assistant Mr. Vincent Chen |
| Address: | No.24, Tsang Hou St., BanQiao Dist., New Taipei City 22055, TAIWAN (Sales & Office) |
| TEL: | 886-2-29685577 / 29675553 |
| FAX: | 886-2-29675545 / 29689740 |
| Email: | techcontrol@seed.net.tw |
| URL: | http://www.tech-control-tw.com |
| ZIP: | 22055 |
Hot Products
3A/IDF/Tri-Clamp/Butt Weld/I-Line/Q-Line...
3A/IDF/Tri-Clamp/Butt Weld ELBOW, BEND, ...
RJT/BSM/CIP FLAT FACE Union Fittings, IN...
DIN Union ( DIN 11851 ) Fittings, INOX S...
SMS Union (SMS 1145) Fittings, INOX Stai...
SANITARY HYGIENIC BUTTERFLY VALVE with T...
SANITARY HYGIENIC BALL VALVE with Tri Cl...
SANITARY HYGIENIC CHECK VALVE, Spring-Re...
-
SANITARY HYGIENIC PLUG VALVE with Tri Cl...
SANITARY HYGIENIC PNEUMATIC CONTROL VALV...
Stainless Steel CIP SANITARY HYGIENIC CE...
Custom Metal Part, Machined Metal Part, ...
TEL: 886-2-29685577 / 29675553 FAX: 886-2-29675545 / 29689740
Email: techcontrol@seed.net.tw